E3Z-T81A Omron photoelectric switch
Shape | Square type |
---|---|
Sensing method | Through-beam type |
Sensing distance | 10 m max. |
Standard sensing object | Opaque: 12 mm dia. min. |
Directional angle | 3 to 15 ° |
Light source | Red LED (660 nm) |
Power supply voltage | 12 to 24 VDC ±10% ripple (p-p) 10% max. |
Current consumption | Emitter: 15 mA max. Receiver: 20 mA max. |
Control output | PNP open collector 26.4 VDC max. Load current: 100 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current: 10 to 100 mA) |
Operation mode | Light-ON/Dark-ON selectable |
Protective circuit | Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection |
Response time | 1 ms max.(Operate or reset) |
Sensitivity setting | Single-turn adjustment |
Ambient illuminance | Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max. |
Ambient temperature | Operating: -25 to 55℃ Storage: -40 to 70℃ |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% |
Insulation resistance | 20 MΩ min. (at 500 VDC) |
Dielectric strength | 1000 VAC 50/60 Hz 1 min |
Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h |
Shock resistance | Destruction: 500 m/s**2 3 times each in X, Y and Z directions |
Degree of protection | IEC: IP67 |
Connection method | Pre-wired models (Cable length: 2 m |
Indicator | Operation indicator (orange), Stability indicator (green), Power indicator (orange) |
Weight | Package: Approx. 120 g |
Accessories | Instruction manual |
Material | Case: Polybutylene terephthalate (PBT) Lens: Denatured Polyarylate |
Reviews
There are no reviews yet.